News

  • Ethernet Ring Recovery Time: Test the Application After the Link Fails

    Ethernet Ring Recovery Time: Test the Application After the Link Fails

    A ring restores its alternate path quickly, yet the operator still sees a process alarm or a gap in recorded data. Both observations can be true. Network reconvergence and useful application recovery are measured at different boundaries. A published recovery figure is meaningful only with its to...
    Read more
  • Is an IP40 Industrial Switch Suitable for Outdoors? Review the Complete Enclosure

    Is an IP40 Industrial Switch Suitable for Outdoors? Review the Complete Enclosure

    “Industrial” can describe a switch's mounting, electrical features or operating-temperature capability. It does not automatically mean the device can be mounted in rain. For an IP40 switch, the outdoor installation question begins with the surrounding enclosure and the completed cable entri...
    Read more
  • Industrial Media Converter or SFP Switch? Choose Around the Remote Site

    Industrial Media Converter or SFP Switch? Choose Around the Remote Site

    One remote Ethernet device needs a fiber connection. A media converter looks sufficient. Six months later, the same cabinet needs two cameras, a controller and remote fault diagnosis. The original choice now affects power, port availability and maintenance access. The decision between an industr...
    Read more
  • Industrial Switch Temperature Ratings: Find the Limit Inside the Cabinet

    Industrial Switch Temperature Ratings: Find the Limit Inside the Cabinet

    An industrial switch is rated for a wide ambient range. The selected optical module has a narrower limit, and the power supply begins reducing its available output before the switch reaches its upper rating. Which temperature describes the cabinet? None of those figures alone does. The completed...
    Read more
  • Dual DC Inputs on an Industrial Switch: How to Prove the Power Is Redundant

    Dual DC Inputs on an Industrial Switch: How to Prove the Power Is Redundant

    Two DC input connectors are visible on the switch. Two supplies are listed in the bill of materials. The project drawing is marked “redundant power.” Before accepting that claim, ask what remains running when one defined component fails. Redundancy is a property of the complete arrangement. It d...
    Read more
  • Extended PoE at 250 Metres: Check Speed, Power and the Actual Camera Stream

    Extended PoE at 250 Metres: Check Speed, Power and the Actual Camera Stream

    A remote camera is 220 metres from the equipment room, and the quotation offers a switch with a 250-metre PoE mode. The distance appears to fit. The remaining questions are whether that mode carries the required traffic and whether the camera receives sufficient power over the installed channel....
    Read more
  • CCTV Video Freezes but Ping Works: Trace the Bandwidth Bottleneck

    CCTV Video Freezes but Ping Works: Trace the Bandwidth Bottleneck

    A camera answers ping, its uptime keeps increasing, and the switch reports stable PoE. Yet the operator sees frozen frames when several cameras are displayed together. That combination moves the investigation beyond basic power and reachability. Ping generates relatively little traffic. A succes...
    Read more
  • PoE Watchdog Reboot Loops: Find Out Why the Switch Keeps Restarting the Camera

    PoE Watchdog Reboot Loops: Find Out Why the Switch Keeps Restarting the Camera

    The camera starts, appears briefly in the recorder, then disappears again. A few minutes later the sequence repeats. Replacing the patch cable changes nothing. Before condemning the camera, check whether the switch is deliberately removing its power. A PoE watchdog typically watches a configured...
    Read more
  • How to Size an Industrial PoE Switch Power Supply Without Missing the Losses

    How to Size an Industrial PoE Switch Power Supply Without Missing the Losses

    A 300 W power supply does not automatically provide 300 W of useful power to PoE devices. Some power operates the switch itself, some is lost in conversion and cabling, and the supply may not deliver its full nameplate rating under the cabinet's actual conditions. Supply selection becomes m...
    Read more
  • Can a 24 V Cabinet Power a PoE Switch? Check the Exact Input Model

    Can a 24 V Cabinet Power a PoE Switch? Check the Exact Input Model

    A machine cabinet already has a 24 V DC supply. The new Ethernet switch fits the DIN rail, its enclosure looks identical to the existing non-PoE model, and the camera needs only one network cable. It is tempting to treat the upgrade as a straightforward replacement. The decision depends on the c...
    Read more
  • PoE Power Ratings Explained: From Switch Output to Device Input

    PoE Power Ratings Explained: From Switch Output to Device Input

    A camera specification says 28 W. A switch quotation says 30 W per port. Approving the combination from those two figures alone is a purchasing mistake: the ratings may describe opposite ends of the cable. The power-sourcing equipment, or PSE, supplies electricity. The powered device, or PD, rec...
    Read more
  • PoE Cameras Offline at Night: A Power and Network Diagnosis Guide

    PoE Cameras Offline at Night: A Power and Network Diagnosis Guide

    Eight cameras work through the afternoon. After sunset, several disappear from the recorder, recover and disappear again. By morning, the fault is difficult to reproduce. Replacing the cameras may leave the underlying problem untouched. Night operation can change both electrical demand and video...
    Read more